Technical Introduction:

his machine is mainly castings are made of high stability, strong shock absorption of the advanced gray iron casting and become, and annealing treatment, through multi-channel chi force to eliminate within stress of casting and processing, to ensure high precision about the durability of paste resin wear-resisting and double V before and after the chute TURCITR - B, and the precision shovel flower, to extend the use of the machine precision and life, can't help sliding smoothly and wear resistance, the most suitable for form grindingSpindle using P4 grade super precision angular ball bearings, with special grinding fluid backflow dustproof design, rotating at high speed, low noise, no vibration torque force is big, which retained the spindle during heavy cutting, and all kinds of form grinding of high precision, and prolong the service life of the circulation automatic lubrication system, when the spindle is started, the lubricating oil is automatic cycle of each screw and slide to provide forced lubrication, wear, can greatly reduce the chute machine column above is equipped with a mirror can monitor the lubrication oil, can cheer for you save often forget trouble again.

What is surface grinder?
The surface grinding machine is a machine tool used to provide precision ground surfaces, either to a critical size or for the surface finish. It can process the work pieces with either the  peripheral side or vertical plane of the grinding wheel. Usually There are three basic types of surface grinders: horizontal-spindle, vertical-spindle, single disc grinders and double-disc grinders. We only provide horizontal spindle type surface grinder.  

How does a surface grinder work?
The work pieces are held in place by a magnetic chuck which directly fixed to the work table or held by other clamps. The work table makes longitudinal movement driven by hydraulic power and the grinding head can move transversely on the drag plate, hydraulically and or manually driven is available. Drag plate together with the grinding head can move vertically along the column, driven manually or mechanically.

The machine can grind work pieces made of steel, cast iron and non-ferrous metal etc.

Note: above pictures are for reference only, the machine will be subject to the actual equipment.Please check the Tab Technical Parameter for detail specification.

Feel free to contact:  haige@haigechina.com for further inquiry.